1. Use as directed:
This product serves exclusively lighting purposes and may:
only be used with a voltage of
230V ~50Hz
.
only be used in dry condition,
not in damp or dirt-endangered rooms.
not in areas of high air humidity.
not be exposed to strong mechanical loads or to strong
contamination.
only be installed and operated after a condition inspection if the
product is dirty or has been moistened through storage.
not be modified or converted.
If these points named above are not adhered to, a short circuit or
electrical shock may occur!
2. Technical Data:
146492
146592
Operating voltage:
230V ~50Hz
Safety class:
I
Bulb:
QPAR51, GU10, max.
50W
GX53, max. 9W
Dimensions (L/W/H):
50/7,5/12 cm
60/9,5/9,5 cm
Rotary-/Swivel range:
360°/ 180°
350°/ 90°
Weight:
0,51 kg
0,51 kg
Importer: SLV
Elektronik
GmbH
3. Placement
Operate the product only on an even, stable and tilt-fixed background.
Choose a place for the product where it is prevented from falling
down , e.g. by accidently knocking it down!
The
light exit
should be placed at least so far from the illuminated surface,
as indicated as
minimum distance
on the type plate of the luminaire:
QPAR51:
.
Pay special caution
to easily inflammable objects
(e.g. curtains).
3. Installation
Attach the fitting applying the clamp as shown in the figure.
Clamping range tube: 20-45mm
Clamping range wall: 10-40mm
Inserting the bulb:
Insert the bulb with a quarter-turn to the right.
4. Operation
:
Putting into service
Connect the plug of the product with a socket of the public power
supply(mains).
Information for the user:
Operate the product only if it is working correctly. Switch off the product
with a malfunction immediately and operate it again only after examination
by an electrical specialist. This is the case, when:
visible damages appear.
the product does not work.
smoke, steam or crackling sounds appear.
an overheating is recognisable.
Repairs of the product or work on mains voltage-prominent sections may
only be carried out by qualified electricians.
Attention:
Here exists mortal danger from an electric shock!
How to avoid failure and fire risk:
Do not cover the product - provide free air circulation!
Do not hang or fasten anything on the product, especially no decoration.
Never let children play unsupervised with electric products! Children
can not always estimate dangers in dealing with electric energy correctly.
What is to do if a bulb is defect or does not work?
Disconnect the product from power
, before you exchange the bulbs.
Caution:
Let the bulb
cool down
first before replacement –
otherwise considerable risk of injury exists because of the hot surface.
Replace the bulbs only with bulbs of the same data like socket, power
and capacity. Every other sort of bulb can lead to damages of the light.
Replacing the bulb
: see Installation.
5. What else has to be considered?
Disconnect the product from power
, before you…
clean or maintain the product.
do any works on the product or its components (electric expert).
Art.-Nr.146492/592 11/2007
©
by SLV Elektronik GmbH
Daimlerstr.21-23, 52531 Übach-Palenberg, Germany
Technical Details are subject to change.
Duplication prohibited !
ENGLISH
Instruction Manual
for display fitting
BIMA / DISPLAY GX53
Please read carefully and keep for further reference !
20-45mm
10-40mm
