SLS Lab Pro Safevac Aspiration System
LAB
PRO
1. Safety Precautions
Caveat!
• Please read manual carefully before operating the
instrument and follow all safety norms
• Train the person before operating the instrument
Safety grounding protection!
• Be sure the power outlet is properly
grounded before power on the instrument
• When running the instrument, wear suitable protective garment to
ensure staff safety
• Put the instrument in a wide and airy place, and ensure surfaces are
clean, non-slip, dry and fireproof. Do not operate the instrument
outside, close to water or hazardous substances
• Avoid using unsafe containers
• Make sure the power supply voltage is consistent with the
requirements of the label and the instrument and its accessories
are not damaged
• Before running the instrument each time, check “Accessories”
listed and install accessories in accordance with the instructions to
ensure safety. Accessories must be firmly connected to the
instrument and avoid detachment
• During running, avoid touching valves, injection pumps, piping and
other components. Also, do not move the product
• If the liquid accidentally spills out , shut down immediately and wipe
off the liquid and clean organic solvent to guarantee the necessary
security
• Only unplug the instrument when it has fully powered down
• Be sure only professionally trained personal open the instrument
• No other heavy objects can be on the equipment
2. Range of application
This instrument is for schools, laboratories and factories, and other
application environments designed for liquid dilution and distribution as
following environment:
• No more than 2000 metres above sea level
• Temperature at 0ºC to 40ºC
• Installation type: product is designed to connect the indoor outlet,
voltage fluctuations not exceeding ± 10% of normal
• Inter-instrument, the minimum distance to the wall is 100mm.
The instrument is not suitable for application in residential areas as
well as some of the restrictions specified in Chapter 1
3
