background image

Item

Part

Description

No.

No.

-

EBF-1004-A

Solenoid Filter Replacement Kit; includes Filter Screen
Assembly and O-ring

OPTIONAL TRIM PLATES

10

ETF-312-A

4” (102 mm) Centerset Trim Plate Kit for EBF-187 Faucet
(Faucet Only); includes Back-up Spacer, Self-tapping
Screw and CP Single Hole Trim Plate Assembly

11

MIX-101-A

4” (102 mm) Centerset Trim Plate Kit for EBF-85 or EBF-
187 Faucet with Optional Mixing Valve; includes Back-up
Spacer, Self-tapping Screw and CP Dual Hole Trim Plate
Assembly

12

ETF-510-A

8” (203 mm) Centerset Trim Plate Kit for EBF-85 or EBF-
187 Faucet (Faucet Only); includes two (2) Finger Nuts,
two (2) Washer Gaskets, two (2) Fender Washers, Base
Gasket, Back-up Spacer and CP Single Hole Trim Plate
Assembly

13

MIX-104-A

8” (203 mm) Centerset Trim Plate Kit for EBF-85 or EBF-
187 Faucet with Optional Mixing Valve; includes one (1)
Finger Nut, one (1) Washer Gasket, one (1) Fender Washer,
Base Gasket, Back-up Spacer and CP Dual Hole Trim Plate
Assembly

OPTIONAL MIXING VALVES

14

MIX-60-A

Below Deck Mechanical Water Mixing Valve (BDM
Variation)

15

MIX-135-A

Below Deck Thermostatic Water Mixing Valve (BDT
Variation)

16

MIX-110-AA

Optimix

®

Deck Mounted Water Mixing Valve

For additional information about Sloan Mixing Valves or Trim Plates, consult our
Installation Instructions and Maintenance Guides.

SLOAN VALVE COMPANY • 10500 Seymour Avenue • Franklin Park, IL 60131

Phone: 1-800-982-5839 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380

www.sloanvalve.com

Printed 11-08

Copyright © 2008 SLOAN VALVE COMPANY

Item

Part

Description

No.

No.

1

EBF-10-A

Faucet and Sensor Assembly 
(EBF-85 with Black Plastic Throat Plate)

EBF-170-A

Faucet and Sensor Assembly 
(EBF-187 with CP Metal Throat Plate)

EBF-1009-A

Fiber Optic Sensor Cable Assembly Only 
(replaces EBF-12-A, includes lens holder)

2

ETF-1021-A

0.5 gpm (1.9 Lpm) Spray Head with Key (female thread)

ETF-1022-A

2.2 gpm (8.3 Lpm) Aerator Spray Head with Key (female
thread)

ETF-1027-A

2.2 gpm (8.3 Lpm) Laminar Flow Spray Head (female thread)

ETF-435

Replacement Key ONLY for ETF-1021-A and ETF-1022-A
Spray Heads. (NOT required for ETF-237 Laminar Flow Spray
Head)

3

ETF-295-A

4” (102 mm) Centerset Trim Plate Kit for EBF-85 Faucet
(Faucet Only); includes two (2) Nuts, two (2) Hex Screws, two
(2) Flat Plate Washers, Single Hole CP Cover Plate and Black
Plastic Base Plate

ETF-299-A

4” (102 mm) Centerset Trim Plate Kit for EBF-85 Faucet with
Optional Mixing Valve includes Dual Hole CP Cover Plate and
Black Plastic Base Plate (not shown)

4

ETF-290-A

Faucet Mounting Kit, includes Rubber Gasket, Flange Nut and
ETF-297 1/4” to 3/8” Reducing Compression Fitting
Connector

5

ETF-297

1/4” to 3/8” Reducing Compression Fitting Connector

6

ETF-617-A

3/8” Bak-Chek

®

Tee Compression Fitting

7

EBF-11-A

Solenoid Valve Module Assembly; includes Solenoid
Enclosure, Solenoid Body, and Filter Cap

EBF-4

Four (4) C-size Alkaline Batteries

8

EBF-16

ETF-208, 3/8” (10 mm) Ferrule, two (2) supplied and ETF-
209, 3/8” (10 mm) Compression Nut, two (2) supplied

9

EBF-25-A

Mounting Bracket Kit; includes Wall Bracket Base, Wall
Bracket, Self-tapping Screw, two (2) Wood Screws plus
Washers and Plastic Anchors, two (2) Screws plus Washers
and Toggle Nuts, two (2) Screws plus Washers and Hollow
Wall Anchors

NOTICE:

The information contained in this document is subject to change without

notice.

1

2

9

7

3

10

11

12

13

5

6

14

16

15

8

8

4

PARTS LIST

If further assistance is required, please contact the Sloan Valve Company Installation Engineering Department at 1-888-SLOAN-14 (1-888-756-2614)

Содержание OPTIMA plus Series









Отзывы: