7.
The fuel tank is pre-assembled. Complete the installation in the fuselage using zip
ties or velcro straps to hold the tank in position. Connect a fuel line between the
tank and carburetor, a fuel line between the tank vent and the bottom of the
fuselage, and a fill line to a fueling dot which can be mounted to the fuselage side
opposite your ignition switch. Make sure your vent line does not come close to
any hot exhaust part such as the muffler. Slipstream recommends the use of
small zip ties or fuel line clamps to secure the lines to the tank.
COWLING INSTALLATION:
1.
Fit the cowling in place and make any cutouts necessary to clear your engine and
exhaust components. Trial fit and trim as necessary being careful and accurate.
Be sure to allow enough air exit area in the bottom of the cowling to provide
adequate airflow over the engine. When satisfied with the final fit, attach the
cowling to the fuselage using the supplied screws.
