Slingbox PRO-HD, Руководство пользователя, Страница: 9 / 65

STEP 6: ATTACH THE POWER ADAPTER
• Connect the power adapter cable to the Slingbox
POWER socket.
• Plug the power adapter into an electrical socket.
WARNING: THE POWER SUPPLY IS FOR THE SLINGBOX
PRO-HD, SOLO OR CATCHER. DO NOT USE THIS
POWER SUPPLY ON ANY OTHER SLINGBOX OR
SLING MEDIA PRODUCT.
When plugged in, the power light comes on, and the lights
blink a few times as the Slingbox starts up. The network light
will remain on while your Slingbox is successfully connected to
your network. Both the power and network lights should be on
and not blinking.
TIP: If the network light does not come on within 30 seconds,
make sure that you have correctly connected the Slingbox to your
network router. Check the connectors to see that they are fi rmly
inserted. If the network light still does not come on, try resetting
your Slingbox by holding down the reset button on the back for 10
seconds. When you let go of the button, the network light should
come on. See Troubleshooting on page 14 for more solutions, or go
to: http://support.slingbox.com
STEP 5: LINK TO YOUR NETWORK
• Plug one end of the Ethernet cable into the Slingbox
NETWORK socket.
• Connect the other end to your router.
The Slingbox works with almost any router with a high-speed
Internet connection or a broadband home network. You must
have a router to use the Slingbox.
TIP: For best video performance, Sling Media recommends that you use wired Ethernet
to connect Slingbox PRO-HD to your home network. Wireless connections may not be
able to handle the large amount of information in a high-quality video stream.
Is your TV in a different room than your router? Use a SlingLink TURBO to avoid using
wireless connections. The SlingLink TURBO acts as an extension cable for the Internet
by using your home's existing electrical wiring to transmit the Ethernet signal. For
more information, go to: www.slingbox.com
POWER NETWORK
13 12