STEP 4:
aTTaCH REMOTE CONTROL IR CaBLE
Connect the remote control Ir cable to the Ir jack on the
Slingbox. next, place a remote control Ir cable head on the top
or bottom of your a/V device so it points at its Ir sensor.
Make sure that the head of the remote control
Ir cable extends out far enough over the front
your a/V device to send a signal to it. you may
want to affix the remote control Ir cables using
the adhesive pads after you've determined their
correct positions.
TIP:
The Ir sensor is on the front of your a/V device. Some sensors are behind
a dark, reddish plastic window. Others may be hidden behind the plastic on the
front of the device. If you don't see the sensor, shine a flashlight on the front of
the device and look for a small bulb similar to the one on the end of
the remote control Ir cable. To control more than one device, you
can use the multi-head remote control Ir cable that came with your
Slingbox PrO-HD. you can use one or more Ir heads per device as
needed.
STEP 3:
CONNECT YOUR COaX SOURCE
Coaxial cable carries both video and sound. They're used to
connect antennas or to some cable TV systems. Connect your
coaxial source to the jack labeled COax In on your Slingbox
PrO-HD.
If your coaxial a/V source is already connected to your TV with
a coaxial cable, disconnect it from the TV and then re-connect
this cable to the COax In jack on your Slingbox. Use the
matching cable included with your Slingbox to connect to the
COax OUT jack on the back of your Slingbox, and then to the
In jack your TV.
9
8
IR SENSOR SIDE VIEW
