4.2 Unit mount
1) Take an appropriate bracket from the kit and place it 150-160 cm (4.9-5.2 ft.) from the floor line.
2) Mark and drill two halls and prepare space in the wall that should be used for wires setup.
3) Take two wall anchors from the kit and hammer them into the drilled halls.
4) Fix the bracket on the wall by the screws from the kit.
6) Connect all communication wires and fix the outdoor station on the mounting bracket by one screw
from the bottom side.
Tabo
7
8
Surface mount
Rainshield mount
5. Software setup
Door station default IP address is
192.168.1.90
or
192.168.1.91
Enter this IP adress into PC’s browser address line to enter web interface. Note that your PC must be in the
same segment of local network (i.e. it has IP adress like
192.168.1.XXX
where
XXX
is any number between
2 and 254, excluding 90).
Enter to the web interface using next parameters (by default):
Login: admin
Password: 123456
Then press “SIGN IN” button:
Below you can see web interface main screen:
Here you can find current door station firmware version and network parameters, such as DHCP status,
Gateway IP address, Door station IP address, DNS server, Subnet mask and MAC address.
