SL-10IPT HD
11
12
5.3 Incoming call redirection
Two monitors connected into one system are used.
Notes:
1) If several monitors are connected into one system, the user can view the image from outdoor panels
using any monitor inside this system. The image will be transferred from the «Master» monitor outdoor
panels to the «Slave» monitors.
2) If someone presses call button on the outdoor panel while monitoring is active then the image from
this outdoor panel appears on the monitor screen and call melody starts. Press «Answer»
button to
start conversation.
Note:
If incoming call is successfully redirected to the other monitor then current monitor goes into standby
mode.
Melody starts ringing on
the other monitor inside
the system and visitor image
appears on the monitor screen
Conversation with the
visitor on the other
monitor starts
Incoming call from the
outdoor panel is
initited and user
started conversation
Press «Intercom»
button to start
call redirection
Press «Answer» button on the
other monitor to start
conversation with the visitor
Standby mode
Press «Unlock» button to open
lock connected to the current
door panel, relay built into the
panel will open the lock
Press «Hang up» button to
stop conversation or
incoming call
Intercom
Note:
If somebody presses outdoor panel call button while intercom is active then the image from this door panel
appears on the monitor screen and call melody starts. Press «Answer»
button to start conversation
with the visitor.
6. Monitor settings
6.1 Mouse and touch screen functions
User can use a mouse to change monitor settings. Connect the mouse to the USB port situated on the right
side of the monitor. Mouse can be connected without monitor power disconnection.
Right mouse
button click
1. In standby or monitoring mode click right mouse button to enable or disable
instrumental panel.
2. In playback mode click right mouse button to enable or disable playback
control panel.
5.4 Intercom
Two monitors connected into one system are used.
Melody starts
ringing on the
other monitor
Standby mode
Standby mode
Press «Intercom»
button to start
intercom call
Conversation with the
other monitor starts
Press «Answer» button on
the other monitor to start
conversation
Press «Hang up»
button to stop
conversation
Intercom