7.5. User web interface
Web interface main page has several bookmarks on the top:
Playback
– view records from outdoor panels and cameras;
System log
– system and alarm events log;
Device configuration
– remote access settings;
Local configuration
– local storage and alarm settings;
Logout
– exit web interface.
Web interface main page has following buttons and panels:
Top panel buttons description:
– full screen mode;
– single channel mode (1 video channel on the screen);
– quad channel mode (4 video channels on the same screen);
– zoom instrument (drag zooming area while holding left mouse button);
– enable image streaming for all video channels;
– disable image streaming for all video channels;
– take a snapshot from current video source;
– start all channels video recording;
– stop all channels video recording;
– enable/disable sound (in case if there is a microphone).
Left panel buttons description:
– start/stop recording for current video channel;
– enable/disable sub stream for current video channel;
– enable/disable main stream for current video channel.
2) Set appropriate IP address from the current network segment, subnet mask and gateway in the
monitor settings (Configuration
→
Network
→
Basic). In the current example IP address can be set as
192.168.1.Х, where Х – any number in range 2-254, (except IP addresses that already exist in that network
segment). Subnet mask – 255.255.255.0 and gateway – 192.168.1.1
Note:
If monitor is connected to the Internet directly then public IP address must be used.
7.4. Installing browser plugin
After all settings has been made, open browser and enter door phone IP-address (Sttings
→
Network
→
IP
address) into browser address line. For example if monitor IP address is
192.168.1.50
then type
http://192.168.1.50
into browser address line.
After entering monitor web page you will be asked to install monitoring software. Confirm this installation
and then you can enter monitor web interface:
Enter user name and password (if it is set) then press «Login» button.
User name:
default user name is
аdmin
Password:
default password is disabled (just type user name and press «Login» button)
SL-10IPT HD
27
28
