Slinex Imani, Руководство пользователя

Страница: 6 / 11

Imani
9 10
For adding and deleting IP cameras from the list refer to devece web interface settings (page).
Zone:
alarm zones setup defines types of sensors and working delays for each zone. Default password for
entering zone setup is: 1234. Zones setup can only be performed if alarm is off;
NO. –
zone input number;
Type –
«Normal» enables current zone only in armed mode, «Emergency» or «24 Hour» makes
current zone always active;
Mode –
input trigerring type «3C», «NO», «NC» or «BELL» options are available;
Delay –
delay before alarm activation in seconds, can be set as 0s, 5s, 15s, 20s, 25s, 40s, 60s;
Sensor –
sensor type is used for information purpose while alarming, «Smoke», «Gas», «Pir», «Door»,
«Window», «Panic» or «Flood» options are available;
NO. Type Mode Delay Sensor
1 24 Hour 3C 0s Smoke
2 24 Hour NO 0s Gas
3 Normal NO 15s Window
4 Normal NC 60s Door
5 Emerg. 3C 0s Panic
6 24 Hour BELL 0s Panic
7 24 Hour NO 0s Flood
8 24 Hour 3C 0s PIR
OK
Security
Zone
This menu contains alarm setup options, such as sensors type, delays, sensors schedule, scenarios, etc.
ON/OFF:
alarm scenarios activation, four options are available, active scenario highlighted by the circle;
Out –
enable this scenario when you are out of home;
Home –
enable this scenario when you are at home;
Sleep –
enable this scenario in a night time;
OFF –
disable alarm functions.
Default alarm password is: 1234
Camera:
IP cameras monitoring, press or button to select camera for monitoring then
press to start monitoring. Press button to stop monitoring.
Out Home Sleep OFF
Security
ON/OFF
Security
Camera