7 of 44
ISSUED: 12-02-09 SHEET #: 202-9418-1
For Flat Back Screens
For Bump-Out or Recessed Back Screens
Begin with longer length screw, hand thread through washer, adapter bracket and spacer
in that order into screen as shown below. Screw must make at least three full turns into the
$ * %&/ $ %@ ? $
$ > $ $ Y *?%] *
remaining mounting holes, level brackets and tighten screws.
If you have any questions, please call Peerless customer care at
1-800-865-2112
2-1
2-2
If you have any questions, please call Peerless customer care at
1-800-865-2112
@ ^ $ * $
bracket is still not tightly secured, damage may occur to screen or product may fail.
WARNING
SPACER (
J
)
SCREEN
WASHER (
I
)
SCREW
ADAPTER
BRACKET (
B
)
ADAPTER
BRACKET (
B
)
SCREEN
SCREEN
WASHER (
I
)
WASHER (
I
)
SCREW
SCREW
SPACER (
J
)
ADAPTER
BRACKET (
B
)
Begin with the shortest length screw, hand thread through washer and adapter bracket into
screen as shown below. Screw must make at least three full turns into the mounting hole
* %&/ $ %@ ? $ $
> $ $ Y *?%] *
mounting holes, level brackets and tighten screws.
NOTE:
Spacers may not be used, depending upon the type of screen.
NOTE:
If screen manufacturer's requirements state that more than 0.33" of ventilation is
required, spacers may be used to add an additional 0.5" of space between the wall and the
screen as shown right.
