8
3.
Remote Control
The air conditioner can be controlled via a remote control. Two AAA-batteries are required to use the remote
control.
Note: the air flow direction cannot be adjusted with the remote control.
1. Power: Press the
key to turn on or turn off the machine
2. Timer: Press the
key to set the timer
3. Down: Press the
key to decrease temperature and timer
4. Mode: Press the
key to switch between cooling, fan, dehumidifier
5. Up: Press the
key to increase temperature and timer
6. Fan: Press the
key to select high / low fan speed
7. Sleep Mode: Press the
key to turn on the sleep mode
Multi protective function
4.1.
Frost Protection Function: In cooling, dehumidification or economic power saving mode, if the
temperature of the exhaust pipe is too low, the machine will automatically enter protection status; if
the temperature of the exhaust pipe rises to a certain temperature, it can automatically revert to
normal operation.
4.2.
Overflow Protection Function: When the water in the internal water tank exceeds the warning
level, the machine will automatically sound an alarm, and the LCD temperature display area will show
"FL". At this point, you need to move the drainage pipe connecting the machine or the water outlet to
sewer, other drainage area or a flat tray to empty the water (details see Drainage Instructions at the
end of this chapter). After the water is emptied, the machine will automatically return to the original
state.
4.3.
Automatic Defrosting (cooling models have this function): The machine has automatic
defrosting function: during defrosting, heating symbol on the display screen will flash.
4.4.
Automatic Thermal Protection: To protect the service life of the machine, the machine has
automatic thermal protection in heating mode. During the protection period, the compressor and the
lower motor will stop operation and will automatically return to normal heating state after the
temperature of the machine recovers.
4.5.
Protection Function of the Compressor: To increase the service life of the compressor, it has a 3-
minute delay start protection function
EMPTYING THE WATER CONTAINER
1.
Manual drainage:
1.1
When the internal water tank is full the unit will stop working.
1.2
Shut off the unit and unplug. Try not to move the model abruptly as this may cause water to
may cause the internal water tank to spill out.
