7
When plugged in the unit is automatically is in standby status. Press UP and DOWN keys simultaneous to
change temperature display between Celsius and Fahrenheit (certain models only).
ON/OFF (7)
· Press “POWER” to switch the unit On or Off
· The unit will be turn to cooling mode preset to 22
o
C target temperature. Press again and the unit will
switch off.
Mode button (2)
· Press this key to choose Cooling Fan, SLEEP or Dehumidifying Mode.
Cooling Mode
· After machine turns on, default value is cooling mode with 22⁰C and low fan speed.
· Press “MODE” to select cooling mode, cooling mode indicator (16) turns on
· Press “UP
” (5) or “DOWN
” (4) to adjust temperature (from 16⁰C to 31⁰C)
· Press “FAN” to select fan speed (low, high)
Fan Mode
· Press “MODE” to select fan mode, fan mode indicator (D) turns on
Timer Mode (6)
· Under standby mode, press “TIMER” to setup the power-on time, press “TIMER” to adjust the timer (from
1 to 24 hours). Timer indicator turns on. Unit will start after selected number of hours.
· Under power on mode, press “TIMER” to setup power-off timer. Press “TIMER” to adjust the timer (from 1
to 24 hours). Timer indicator turns on. Unit will stop after selected number of hours.
· Timer functions cannot be combined or repeated. Timer mode indicator (13) turns on
Sleep Mode
· Press Mode button (3) until unit enter into sleep mode, default value of fan speed is low. Sleep mode
indicator (15) turns on
· When the sleep mode is turned on, under cooling mode only, one hour later, set temperature will go up 1
degree Celsius, after another hour the set temperature will go up another degree than kept at this
temperature.
· Sleeping mode is invalid under dehumidifying and fan mode.
· If internal tank full, machine standby and mode selection, sleeping mode will be cancelled.
Note: Sleep mode is not operational in the dehumidifying or Fan mode.
Compressor Protection
· There is a three minutes compressor start delay after power on or restart.
