Page 5
CANOPY HOODS - SLIM LINE
ELECTRICAL
CONNECTION
NOTICE:
This appliance must be connected
only by a licensed electrician and installed in
accordance with the manufacturers instructions.
• Installation, repairs and other work by unqual-
ified persons could be dangerous, for which
the manufacturer cannot be held liable.
• Ensure power is not supplied to the appli-
ance until after installation or repair work has
been carried out.
• Do not connect the appliance to the mains
electricity supply by an extension lead. These
do not guarantee the required safety of the
appliance.
• The connection data is given on the data
plate. This is visible when the grease filters
have been removed. Ensure that this data
matches the household mains supply.
• Connection of this appliance should be made
via a suitable isolator or a double pole fused
spur connection unit which complies with
national and local safety regulations and the
On-Off switch should be easily accessible
after the appliance has been built in.
• When switched off there must be an all-pole
contact gap of 3 mm in the switch (including
switch, fuses and relays according to EN
60335).
• If the switch is not accessible after instal-
lation (depending on country), an additional
means of disconnection must be provided for
all poles.
• For extra safety it is advisable to install a suit-
able residual current device (RCD). Contact a
qualified electrician for advice.
IMPORTANT:
This appliance is supplied for
connection to a 230V~50Hz supply.
The wires in the mains lead are coloured in
accordance with the following code:
Green/Yellow =
Earth
Blue =
Neutral
Brown =
Live
WARNING:
THIS APPLIANCE MUST BE
EARTHED
