Don’t forget to
install the power
cord and your
IO shield
first
!
Some CPU coolers may require a
back plate installed before installing
the motherboard into the case.
It is advised to also check that any
back of motherboard M.2 drives are
installed before mounting the
motherboard.
Once the
IO shield
and power cord /
power cord grommet are properly
installed the motherboard can now
be mounted using
4x 6-32 x 1/4”
TRUSS HEAD
screws.
A Phillips #2 screw driver with a
minimum 3” shaft length
is
recommended for installing these
screws. Both of the screws on the
PCIe slot side of the motherboard
have pass-through holes in the
case frame to allow the screw driver
and screw to pass through and be
screwed in straight.
Additional installation instructions
for your CPU, CPU cooler, RAM,
etc. are covered by your
motherboard or coolers respective
user manual.
MOTHERBOARD
