8
5926
19
2021
-
SXP35 & SXP50
MC_0072
Stern Thruster Cowls/ Grids
Installing a stern thruster cowl for stern thrusters that will allow installations in boats with shallow drafts or due to other obstructions on the stern.
These can include obstacles such as trim tabs, jets or surface drive propeller systems where shallow installation of a stern thruster is the only option.
Cowls:
Designed to aid in water redirection and reduce air entering the tunnel in shallow installations.
Grid’s:
Designed to protect the thruster from objects while in use.
MG_0017
Shallow installation
Cowl water flow redirection
An angled edge further
preventing air attraction into
the tunnel
Composite material with smooth
inner walls for optimal water flow
and strength
A standard Sidepower stern
thruster tunnel with add-on cowls
for shallow installation
cowls to change the
water flow direction to
avoid obstructions on
the stern
cowls help prevent air
from the water surface
entering the tunnel in
shallow installations
Radius corners prevent
turbulence
Easy installation for easy
bolt-on fitting
A
B
C
D
IMPORTANT
Angled cowls out of horizontal, must be
installed deeper to avoid air entry in the
thruster tunnel
Model #
90126
90080
90077
90136
90130
90220
90560
A (mm/ in)
528/ 20.8
681/ 26.6
823/ 32.4
850/ 33.5
1010/ 39.75
1208/ 47.6
1580/ 62.2
B (mm/ in)
166/ 6.5
172/ 6.8
243/ 9.6
260/ 10.2
330/ 13
393/ 15.5
515/ 20.3
C (mm/ in)
130/ 5.1
240/ 9.4
D (mm/ i n)
170/ 6.7
256/ 10.1
256/ 10.1
288/ 11.3
340/ 13.4
419/ 16.5
540/ 21.3
IMPORTANT
Install the cowls/ grids before mounting the tunnel to the SX thruster.
100mm
177mm
537mm
174mm