Sleipner SE-IP120, Руководство по установке, Страница: 5 / 28

5
2685 13 2021
-
SE IP 80 & SE IP 120
MC_0057
Technical Specifi cations
Motor: Custom made reversible DC-motor.
Gear house: Seawater resistant bronze. Ball-bearing at propeller shaft and a combination of ball bearing and slide bearing at drive shaft.
(Pre-fi lled and sealed for life)
Motor bracket: Glass fi bre reinforced composite material. Brass thread inserts.
Ignition
Protection: Conforms to ISO 8846
Tunnel: Cross spun with rowing G.R.P tunnel
Steel & aluminium tunnels available at request.
Propeller: 5-blade skewback “Q-prop” propeller, fi breglass reinforced composite.
Batteries: Minimum recommended battery capacity (cold crank capacity by DIN/SAE standard)
Contact a battery supplier for more information.
Max. Use: 2 - 3 min. duty cycle at 20º
Safety features: - Electronic time-lapse device protects against sudden change of drive direction.
- The electric thermal cut-off switch in electro motor protects against overheating (auto-reset when electro motor cools down).
- Flexible coupling between electro-motor and drive shaft protects electro motor and gear system if propeller jams.
- Original Sleipner panels shut off automatically 6 minutes after last use.
- Original Sleipner panels use child-safe double ON buttons.
- An integrated microprocessor monitors solenoids, reduce wear and risk of solenoid lock-in.
- Auto-stop of the thruster occurs when an undesirable solenoid lock-in occurs or when continuous operation cut-off timer
exceeds 3 minutes.
MC_0131
Thruster Measurements
Measurement
code
Measurement description
mm inch mm inch mm inch
ID Internal tunnel diameter 185 7,28 185 7,28 215 8,46
H Motor Height 406 15,98 406 15,98 501 19,72
W Width 262 10,31 262 10,31 306 12,05
L Length 327 12,87 327 12,87 381 15,00
WD Water Depth 185 7,28 185 7,28 215 8,46
TL Minimum tunnel length 179 7,05 179 7,05 233 9,17
TL (recommended) Recommended tunnel length 216 8,50 216 8,50 276 10,87
T (min) Minimum tunnel wall thickness 6 0,24 6 0,24 6 0,24
T (max) Maximum tunnel wall thickness 8 0,31 8 0,31 8 0,31
* IP 80
12v
* IP 80
24v
* IP 120
24v
*Valid for SE IP & SEP IP
MC_0138
Thruster Specifi cations
Description * 80 * 100 * 120 * 130 * 150
Available DC System (v) 12v & 24v 12v & 24v 24v 12v & 24v 24v
Thrust 12v or 24v (kg * lbs) 96 kg * 212 lbs 116 kg * 256 lbs 139 kg * 306 lbs 160 kg * 352 lbs 182 kg * 400 lbs
Thrust 10.5v or 21v (kg * lbs) 80 kg * 176 lbs 100 kg * 220 lbs 120 kg * 264 lbs 130 kg * 284 lbs 150 kg * 330 lbs
Typical Boat Size (m * ft) 10m - 15m * 35ft - 48ft 12m - 17m * 35ft - 15ft 13m - 18m * 42ft - 60ft 13m - 19m * 42ft - 62ft 14m - 20m * 44ft - 64ft
Propulsion System Twin Twin Twin Twin Twin
Power (kw * Hp) 4.4kw * 6hp 6.3kw * 8.4hp 6.4kw * 8.55hp 6.5kw * 8.7hp 8.8kw * 11.8hp
Weight (kg * lbs) 20kg * 44lbs 31kg * 68lbs 34kg * 74lbs 37kg * 77lbs 38kg * 79lbs
*Valid for SE / SE IP & SEP / SEP IP
MG_0076
H
W
L
TL
WD
ID
T
Tunnel centre line
Twin Propeller
Propeller position will
vary with each thruster
model
The gear leg/ propeller(s) must
never extend out of the tunnel