SLEIPNER MOTOR AS SE 140 S IP, Инструкция по установке и эксплуатации

Страница: 3 / 28

3 SE 50/140S ignition protected thruster assembly
version 1.0.0 - 2017
Responsible installer must
consider and facilitating
enough space and access
regarding installation,
service and maintenance
of the thruster.
Thruster A B C D E
min
F F
recommended
G
min
G
max
(mm • in)
SE50/140S IP 140 • 5.5 323 • 12.7 230 • 9.1 272 • 10.7 140 • 5.5 92 • 3.6 184 • 7.2 4 • 0.16 6 • 0.24
Motor: Custom made reversible DC-motor.
Gearhouse: Seawater resistant bronze. Ball bearing at propeller shaft; combination of ball bearing and slide bearing at
driveshaft.
Motor bracket: Seawaterresistant aluminium.
Ignition protection: Conforms to ISO 8846
Propeller: 5-blade Skew-back design "Q-prop" propeller, reinforced composite.
Batteries:
Minimum recommended battery capacity (cold crank capacity by DIN standard)
See table
Max. use: S2 = 3 min. or appr. 7-10% within a limited time frame. All electromotors are protected against overheating.
Safety: Electronic time-lapse device protects against sudden change of drive direction. Electric thermal cut-off switch in
electromotor protects against over heating (auto reset when electro motor cools down).
Flexible coupling between electro-motor and driveshaft protects electromotor and gearsystem if propeller gets
jammed.
If original Side-Power panel is used, the panel shuts off automatically 6-9 minutes after last use.
Integrated microprocessor monitors solenoids, reducing wear and risk of solenoid lock-in. Auto-stop of thruster in
case of accidental solenoid lock-in or if run signal is continuous for more than 3 minutes.
Technical specifications
C
A
E
A
E
D
C
B
Waterline
II
III
IV
I
Waterline
Waterline
E
E
G
G
D C
F
SE 50/140 S IP
62 • 136
50 • 110
27’ - 37’ • 8 - 11
140 • 5.5’’
Single
2.4 • 3.2
12/24
15 • 33
350/175
SE50/140S-12V(-IP)
SE50/140S-24V(-IP
SEP50/140S-12V(-IP)
SEP50/140S-24V(-IP)
Thrust at 12V/24V*
(kg • lbs)
Thrust at 10.5V/21V*
(kg • lbs)
Typical boat size
(ft • m)
Tunnel I.D
(mm • in)
Propulsion system
Power at 10.5V/21V*
(kw • Hp)
For DC system
(V)
Weight
(kg • lbs)
Rec. CCA
(CCA** 12/24V)
Art.nr. 12V
Art.nr. 24V
Art.nr. 12V PRO*
Art.nr. 12V PRO*