SLEEPTRACKER TEMPUR-Ergo Smart Base, Руководство по установке

Страница: 17 / 54

32 33
Identify the head and foot of the base
and ensure it is oriented correctly.
The logo is located on the foot end
of the base. Untie the bundled power supply cable
(attached to the activated carbon pouch
near the head of the base). Remove and
discard all carbon pouches.
Remove the packaged components
(electronics bag with power supply and
remote control; legs bag; instruction
manuals and QR code sheet) and
mattress retainer bar from the underside
of the frame. Connect the power supply cable to the
power supply from the electronics bag.
Screw the legs into the base. Do not
overtighten. Place the base up on its legs.
• Two people are required.
Locate the QR code sheet. Set it aside
for later. The customer will need this QR
code later in order to connect to the
Sleeptracker app. Plug the power supply into a surge
protector (not included) connected to a
power source. The LEDs under the bed
will blink.
STEP
1
STEP
5
STEP 2 STEP 6
STEP
3
STEP
7
STEP
4
STEP
8
SET UP THE BASE CONNECT THE POWER SUPPLY