If the lower device fits firmly on your teeth, then remove and replace it 5
times. If it does not snap on, you can just leave in place. The device
should set in the mouth for 2 minutes. During this time, the lower jaw
should remain forward 80% and the wings should be positioned against
the upper mouthpiece and in front of the wheels.
Place your index finger in your mouth and palpate the distance between
the wheels and the wings. Or you can pull your cheek back while looking
in a mirror to determine the you will need to move the wheel forward to
contact the wings. Then remove both devices. Using the hex key, turn
counter clockwise to loosen the wheel. Move the wheel forward to abut
against the wing and tighten slightly. Over tightening will strip it. Place
back in the mouth, move your lower jaw forward and close your mouth.
Recheck to see how you have done. Adjust, as needed.
Move wheels to meet wings
On and Off 5 times
Next Two Weeks
The device will shrink for two weeks, so run under
hot tap water for 15 sec before using it.
