4
IMPORTANT DO’S AND DON’TS
DO:
• Plug your adjustable base into a power surge protector.
• Evenly distribute weight when sleeping in a split setup. Uneven
distribution of weight can cause the base to raise unevenly.
• Call Customer Service for any technical issues. Do not try to force
the base down, this can damage the motors or frame.
• Use mild soap and water to clean your adjustable base if staining
occurs.
• Keep in mind that adjustable bases are recommended to be used
with adjustable friendly mattresses.
• Lower to the flat (horizontal) position after use and in between
presets.
• Register your warranty as soon as your adjustable base has been
delivered.
DON’T:
• Sit on corners/edges of base, this may warp the frame, struts or
foam.
• Tilt the base on its side. This can damage the legs and/or leg
screws.
• Stand or jump on the adjustable base at any time, this can damage
the frame and motors.
• Drag the base to move it. Dragging the base could damage the
frame, strip the nut/bolts or break the legs. Purchase castors if you
plan on moving your base routinely.
• Enter and exit the adjustable base with the head and/or foot in
the articulated position. Enter or exit your adjustable in the fla
(horizontal) position.
• Tinker with or modify base. This will void the warranty.
• Press down on the head or foot while actuated can damage frame
and motors.
SAVE THESE INSTRUCTIONS.
Safety Precautions and Usage Statements
FCC Compliance:
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
on, the user is encouraged to try to correct the interference by one or
reception, which can be determined by turning the equipment off and
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•
to which the receiver is connected.
Connect the equipment into an outlet on a circuit different from that
•
Consult the dealer or an experienced radio/TV technician for help.