background image

Deutsch

spielen. Kinder sollten das Bettgestell nicht ohne Aufsicht Erwachsener 
bedienen.

HERZSCHRITTMACHER :

Einige Produkte enthalten Neodym-MAGNETEN, die Geräte wie Herzschritt-
macher, ICDs und andere magnetfeldempfindliche Geräte stören können. Es  
wird DRINGEND empfohlen, dass Besitzer solcher medizinischen Geräte ihren 
Arzt konsultieren, bevor sie Produkte verwenden, die Neodym-MAGNETEN 
enthalten. Es ist auch möglich, dass einige Schrittmacher die Vibrationsbewe-
gungen der optionalen Massagefunktion fälschlicherweise als Bewe-
gung/Übung interpretieren. Dies tritt häufig bei Produkten auf, die eine 
vibrierende Bewegung verursachen und wird das Funktionieren des 
Herzschrittmachers wahrscheinlich nicht beeinträchtigen. Bitte konsultieren Sie 
Ihren Arzt, bevor Sie die Massagefunktion nutzen.

REGELN FÜR DIE NUTZUNG ZUHAUSE UND IM KRANKENHAUS :

Die verstellbaren Bettgestelle von Ergomotion sind ausschließlich für den 
Heimgebrauch bestimmt. Dieses Bettgestell wurde nicht als Krankenhausbett 
konzipiert und entspricht nicht den Krankenhausstandards. Verwenden Sie 

oder in der Nähe von explosiven Gasen.

ZUSÄTZLICHE SICHERHEITSVORRICHTUNGEN

Die Rollen (optionales Beinzubehör) sind mit Feststellrädern ausgestattet, um 
ungewollte Bewegungen zu verhindern. Doch selbst wenn sie blockiert sind 
und nicht rollen können, können die Rollen gleiten. Kopf- und Fußmotoren mit 
Freiauslösung sind so konstruiert, dass sie die Matratze senken, indem sie nur 
mit der Schwerkraft zurückgezogen werden und niemals nach unten ziehen, 
wodurch die Klemmpunkte minimiert werden.

HEBE - UND SENKMECHANISMEN

Die Hebe- / Senkfunktion erzeugt während des Betriebs ein minimales 
Brummen. Das ist normal. Während des Betriebs berühren die Hubarmräder 
den Plattformträger des Bettgestells. Das kann zu einem Kontakt zwischen 

beweglichen Komponenten einer Spannung ausgesetzt und die Resonanz 
wird auf ein Minimum reduziert. Wenn übermäßige Geräusche oder Vibra-
tionen auftreten, führen Sie den Bewegungsvorgang (heben oder senken) mit 
der Fernbedienung aus. Dies sollte die Aktivierungsmechanismen des Gestells 
auf die richtige Betriebsposition ausrichten. Bei normalem Betrieb treten die 

18

pg.1-4  Sicherheitsvorkehrungen und Nutzungshinweise

Achtung: Haftungsausschluss
Lesen Sie alle Anweisungen, bevor Sie Ihr verstellbares Bettgestell benut-
zen. Bewahren Sie diese Anleitung sorgfältig auf. 
UM DAS RISIKO VON SCHOCK, VERBRENNUNGEN, BRAND ODER 
VERLETZUNGEN ZU REDUZIEREN :

Für optimale Sicherheit und Betrieb schließen Sie das Bettgestell an einen 
Überspannungsschutz an (nicht im Lieferumfang enthalten). Das Bettgestell 
sollte nur direkt an eine Steckdose oder einen Überspannungsschutz anges-
chlossen werden (wird dringend empfohlen). Ziehen Sie immer den Netzsteck-
er aus der Steckdose, bevor Sie Teile des Bettgestells warten. Um das Risiko 
eines Stromschlags zu verringern, ziehen Sie den Netzstecker heraus, bevor 
Sie mit dem Reinigen beginnen. Um die Verbindung sicher zu trennen, stellen 
Sie sicher, dass sich das Bettgestell bei ausgeschaltetem Motor in einer 
flachen Position befindet, und ziehen Sie erst dann den Stecker aus der 
Steckdose. Halten Sie das Netzkabel von heißen Oberflächen fern. Betreiben 

das Bettgestell vorerst nicht weiter benutzen sich an ein qualifiziertes Kunden-
dienstzentrum wenden: wenn ein Kabel oder Stecker beschädigt ist, nicht 
richtig funktioniert oder ins Wasser gefallen ist. Verwenden Sie das Bettgestell 
nur für den gemäß dieser Anleitung vorgesehenen Gebrauch. Verwenden Sie 
keine Zubehörteile, die nicht vom Hersteller empfohlen werden. Eine enge 
Überwachung ist erforderlich, wenn das Bettgestell von oder in der Nähe von 
Kindern, Rekonvaleszenten, Behinderten oder Haustieren benutzt wird. Bei 
unsachgemäßer Verbindung des Geräts besteht die Gefahr eines elektrischen 
Schlags, elektrischen Feuers oder eines fehlerhaften Betriebs. Wenn der 
Stecker nicht in Ihre Steckdose passt, wenden Sie sich an einen qualifizierten 
Elektriker, um eine geeignete Steckdose zu installieren. Nicht autorisierte 
Änderungen oder die Nichtbenutzung einer Steckdose oder eines Überspan-
nungsschutzes können den elektrischen Teil Ihrer Garantie ungültig machen. 

HAUSTIERE UND KINDER :

Entsorgen Sie sofort alle Verpackungsmaterialien, da diese für Kleinkinder und 
Haustiere ein Erstickungsrisiko darstellen können. Um Verletzungen zu 
vermeiden, sollten Kinder und kleine Haustiere nicht auf oder unter dem Bett 

Содержание 450













































Отзывы: