SLE AEDI WASH GLOBUS 90 RGBW, Руководство пользователя

Страница: 13 / 20

12
the previous functions without any change press the MENU button
。
2. If
（
flash mode
）
is selected, press the ENTER button to confirm, then use the DOWN
and UP button to adjust the type of the rotation(1…..9). Once select, press the ENTER button
to store or automatically return to the main functions without any change after one minute. To
go back to the previous functions without any change press the MENU button.
3. If
（
fade
）
is selected, press the ENTER button to confirm, then use the DOWN and
UP button to adjust rotation time(1…..9). Once select, press the ENTER button to store or
automatically return to the main functions without any change after one minute. To go back to
the previous functions without any change press the MENU button.
Key Board Lock
Press the MENU button up to when the is showing on the display. Pressing the ENTER
button and the display will blink. Use the DOWN and UP button to select the
（
lock the
key board
）
or
（
normal
） ，
Once select, press the ENTER button to setup or automatically
return to the main functions without any change after one minute. Back to the previous functions
press the MENU button.
Auto Test
Press the MENU button up to when the
，
is blinking on the display. Pressing the ENTER
button and the unit will run self-test by built-in program. To go back to the functions press the
MENU button again.
LED
Press the MENU button up to when the is shown on the display. Pressing ENTER button
and the display will blink. Use DOWN and UP button to select
（
display on
）
or
（
display off 20 seconds after exit menu
）
mode. Once select, press ENTER button to setup or exit
menu mode without any change after one minute. Back to the functions without any change press
MENU button again.