background image

CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PAGE

Ratings and Dimensions  . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installation Requirements:

Boiler Location  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4
Vent Requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Boiler Internal Baffles  . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Vent Piping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Installing Water trim  . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Piping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Installing Burner  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Oil Supply Piping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Wiring the Boiler  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Operating Instructions:

Precautions Before Starting  . . . . . . . . . . . . . . . . . . . . . .6
Start-up  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Cleaning and Filling New Water Boiler  . . . . . . . . . . . . . .6
Wiring Diagrams  . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-11

Burner Data:

Riello  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Care and Maintenance:

Extended Shutdown  . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Freezing Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Oil Burner  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
General Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . .14

SAFETY WARNING:

KEEP BOILER AREA CLEAR AND FREE FROM 
COMBUSTIBLE MATERIALS, GASOLINE AND 
OTHER FLAMMABLE VAPORS AND LIQUIDS. 
FAILURE TO ADHERE TO ABOVE SAFETY
WARNING, MAY RESULT IN PERSONAL INJURY 
OR DEATH AND PROPERTY DAMAGE.

IMPORTANT:

The installation of this equipment must conform

to the requirements of the authority having jurisdiction or, in
the absence of such requirements, to the Installation of Oil
Burning Equipment, ANSI/NFPA 31, latest edition, and to the
National Electrical Code ANSI/NFPA 70, latest edition.  The
installation must also conform to the additional requirements in
this Slant/Fin Instruction Manual.  Where there is any differ-
ence, the more stringent requirement shall govern.

In addition, where required by the authority having jurisdiction,
the installation must conform to American Society of
Mechanical Engineers Safety Code for Controls and Safety
Devices for Automatically Fired Boilers, No. CSD-1, latest 
edition.

THIS MANUAL MUST BE LEFT WITH OWNER AND

SHOULD BE HUNG ON OR ADJACENT TO THE

BOILER FOR REFERENCE.

IMPORTANT:  This boiler must be installed by a trained, 
experienced, service technician, licensed for the installation
and servicing of oil burning equipment or otherwise qualified by
the authorities having jurisdiction over the installation.

Part No. 470908000  Publication No. EC-10DV-40 Rev.B

Printed in U.S.A. 1214

THIS BOILER OPERATES WITH POSITIVE PRESSURE IN
THE FLUE AND OVER FIRE, ALL SEALS MUST BE IN
PLACE WHEN OPERATING THE BOILER. ALL VENTING
MUST BE INSTALLED AND SEALED ACCORDING TO THE
VENT MANUFACTURER’S INSTRUCTIONS.

DIRECT VENT OIL-FIRED WATER BOILER/NO. 2 OIL

INSTALLATION AND OPERATING INSTRUCTIONS

EUTECTIC 

EC-10DV Series

CAUTION

The information in this manual must be followed exactly
to avoid personal injury, property damage or loss of life.

SEE BACK COVER FOR

SERVICE PERSONNEL

Содержание EUTECTIC EC-10DV Series
















Отзывы: