
ENGLISH
17
ca. 5 cm
click!
minimum distance
5 cm
1. AFFIXING THE TREE SLING AT FIXED-POINT 1
• Wrap the tree sling around the fixed-point,
engage and adjust it in length.
• Make sure that you allow at least 5 cm
between Slack-Ring and fixed-point.
Fig. 3
2. AFFIXING THE SLACKLINE AT FIXED-POINT 1 WITH THE SLACK-LOCKER PRINCIPLE
• Pick up the Slackline at least 50 cm
from one end and run the folded
line two times from bottom to top
through the big square-shaped
opening of the Slack-Ring (Fig. 4, 1–2).
• To facilitate the further threading process
simply fold the emerged loop to one side
and continue as shown in Fig. 4, 2–5.
Fig. 4
Tip for the setup:
Before affixing the Slackline at fixed-point 1 lay out the Slackline between the fixed-points
so that about 3–5 m of the remaining line are left at fixed-point 2 for installing the pulley system. Now affix the
webbing as usual at the level of fixed-point 1 with the tree sling, so that there is remaining line at fixed-point 1.
Doing so speeds the process of threading the pulley system.