SL Analytics TitroLine 5000 Скачать руководство пользователя страница 12

Страница: 12 / 82

2.3 Connecting the Titrator - Combination with Accessories and Additional
Devices

2.3.1

Back panel of the titrator TitroLine® 5000

Fig. 3

2.3.2

Connection ports of the TitroLine® 5000 . Connection of Electrodes

The TitroLine

5000 has following connections:

1) pH/mV measurement input (DIN or BNC through adapter) for the connection of pH, redox and

other measurement or combination electrodes.

2) Input for reference electrodes (Ref.)
3) Temperature measurement input for connecting Pt 1000/NTC 30 electrodes

Two RS232 ports, 4-channel (Mini-DIN):

4)  RS2 for connection of a weighing balance and other devices from SI Analytics (burettes etc.)
5)  RS1 for connection to the PC
6)  USB-

A (“Master“) interfaces for connecting USB devices such as a keyboard, printer, manual

control unit, USB memory device

7)  USB-B interface (mini type) for connection to a PC
8)  Connection of the external power pack/supply TZ 1853
9)  On/Off switch

2.3.3

Connecting a printer

Printers with a USB interface are to be connected one the USB-A interface. These printers

have to

feature HP PCL emulation (3, 3 enhanced, 5, 5e no GUI or GDI printers!). Alternatively the thermo-
compact printer Seiko S445 can be connected.

2.3.4

Connecting a USB device (manual controller, keyboard, memory device, hub)

The following USB devices can be connected to the USB-A interfaces:



TZ 3880 manual controller (in the following: ”mouse“)



PC-keyboard



Printer



USB storage devices, e.g. USB sticks



USB hub



USB barcode scanners

2.3.5

Connection of analytical balances

Analytical balances are to be connected to the RS232-2 using an appropriate cable.

Содержание TitroLine 5000



















































































Результаты поиска

Содержание TitroLine 5000

Отзывы:

SL Analytics TitroLine 5000, Руководство по эксплуатации, Страница: 12 / 82

Результаты поиска

Содержание TitroLine 5000

Отзывы: