4
·
When exiting the search menu, the receiver will work on the channel where the triangle indicator is
located.
RF Racing
·
The <RF Racing> mode is specially set for the racing. In this mode, the goggels can work only on the
eight channels of the Race band. The regulating channels of <CH> button will be increased, while the
regulating channels of <BAND> button will be decreased. The channel search function can be only used
to scan the eight channels of the Race band.
3D Display
·
The Side-by-Side (half) 3D display can be supported in the RF, AV IN, HDMI IN and PLAYBACK modes.
·
The Side-by-Side (half) 3D video format can be converted only when the two images are arranged on the
left and right of the same screen. Meanwhile, long press the <MODE> key to enable the 3D display
function. The 3D icon will be displayed on the screen.
·
The Top-and-Bottom 3D and other 3D formats is not supported.
·
It may be required to adjust the IPD to achieve the optimal display effects.
·
The icon can be displayed in the 2D mode by default after starting up each time.
Voltage Calibration
·
Add voltage calibration function in system menu, voltage can be calibrate around ±0.9V.
·
During the calibration process, the voltage reading is changing in real time.
·
For more accurate calibration, multi meter is required.
·
The Voltage reading on OSD is the loaded voltage of the battery(the goggles is the load), by using the
multi meter to reading the loaded voltage of the battery, you can calibrate the voltage reading on OSD, so
the reading is equal to the real voltage of the battery.
Button Function (
for the button function of playback mode, see the description of "Playback" part).
TRACK Button:
·
Short press the button in the normal mode to activate the Head Tracker reset function.
·
Long press the MENU button for 3 seconds to enter into the menu setting status.
·
Press the button to switch between the four main menus in the MENU status.
CH Button:
·
In the RF mode, short press the channel button to adjust the channel in cycles.
·
In the RF, AV IN, HDMI IN and PLAYBACK modes, long press the button for 3 seconds to adjust the
volume upwards.
·
Press the button in the MENU status to select the menu upwards.
BAND Button:
·
In the RF mode, short press the band button to adjust the band in cycles.
·
In the RF, AV IN, HDMI IN and PLAYBACK modes, long press the button for 3 seconds to adjust the
Содержание SKY03S
Страница 1: ...SKYZONE SKY03S FPV GOGGLE USER MANUAL Rev1 0...
Страница 3: ...2 Function Diagram...
