background image

 

Operational Guidance                                                                                 

The two 5.8GHz wireless receiver modules, the two independently workable display modules and the new DVR 

system used to support the 2D & 3D display modes are built in the SKY03S FPV goggles. The wireless receiver 
system can work in the diversity mode to improve the receiving effect. In this mode, the channel and band settings 
for wireless receiver can be compatible with most of the conventional ISM 5.8GHz transmitters, in order to support 
the 6 bands and the 48 channels (for detailed bands and channels, see the specification). 

DVR system use high-quality H.246 video compression technology to better restore the video screen, save the 

more storage space, support the 128GB high-capacity memory card(UHS-I U1), and support the automatic video 
recording function. For details, see the description of the "Video" section. 

 

Quickstart 

Preparation 

· 

Install the lenses, goggles, antennas and memory cards for the FPV goggles. 

· 

Connect the camera to the transmitter, and turn on the power; set the working channel according to the 

transmitter instructions; switch on the power for the SKY03S FPV goggles; long press the power button 
for 3 seconds to turn on the goggles (long press the power button for 3 seconds to turn off the goggles). 

· 

Short press the <BAND and CH> buttons to adjust the channel and frequency of the receiver, to match 

the frequency of the VTX. 

· 

Slide the IPD adjuster to adjust the interpupillary distance. 

Channel Search 

 

· 

Button Function 

 

· 

Long press the <CH Search > button to pop up the channel search menu. 

 

· 

Short press the <CH Search> button to start auto search (repeatedly). The auto search function is 

performed from low to high according to the frequency. After searching for 48 channels, the receiver will 
automatically work on one channel with the strongest signal. The signal strength of the channels is shown 
in the histogram. Please press the LEFT or RIGHT Button to manually select the channels. The band, the 
channel and the signal strength corresponding to the location of the triangle indicator will be updated in 
real time. 

Содержание SKY03S











Отзывы: