6
Function and Control
MODE button
Press this button to select your required operation mode.
●
When selecting auto mode, air conditioner will operate automatically according to ex-factory setting. Set temperature can’t be adjusted
and will not be displayed as well. Press "FAN" button can adjust fan speed. Press " " or " " button can adjust fan blowing angle.
●
After selecting cool mode, air conditioner will operate under cool mode. Press "+" or "-" button to adjust set temperature. Press "FAN"
button to adjust fan speed. Press " " or " " button to adjust fan blowing angle.
●
When selecting dry mode, the air conditioner operates at fan1, fan speed can’t be adjusted. Press " " or " " button to adjust fan
blowing angle.
●
When selecting fan mode, the air conditioner will only blow fan, no cooling and no heating. Press "FAN" button to adjust fan speed.
Press " " or " " button to adjust fan blowing angle.
●
When selecting heat mode, the air conditioner operates under heat mode. Press "+" or "-" button to adjust set temperature. Press
"FAN" button to adjust fan speed. Press " " or " " button to adjust fan blowing angle. (Cooling only unit won’t receive heat mode
signal. If setting heat mode with remote controller, press "ON/OFF" button can’t start up the unit).
Note:
● For preventing cold ai
r, after starting up heating mode, indoor unit will delay 1~5 minutes to blow air (actual delay time is depend on
indoor ambient temperature).
● Set temperature range from remote controller: 16~31°C; Fan speed: auto, fan1, fan2 , fan3 , fan4, fan5, stepless speed.
Auto
Cool
Dry
Fan
Heat
ON/OFF button
Press this button can turn on or turn off the air conditioner.
FAN button
Pressing this button can set fan speed circularly as: auto (AU
TO), fan1(
), fan2 (
) ,fan3 (
) , fan4 (
),
fan5 (
), stepless speed.
Note:
● In
AU
TO speed, air conditioner will select proper fan speed automatically according to ambient temperature.
● Fan speed under dry mode is fan1.
●
After entering the stepless speed mode, users can adjust the fan speed according to the button "+" or "-".
button
Note:
●
When selecting " " with remote controller, it’s auto swing.
Up
&down swing louver of air conditioner will swing up&down automatically
at the maximum angle.
●
When selecting " , , , , " with remote controller
swing.
Up&down swing louver
of air conditioner
will stop at that position as shown by the icon to swing.
●
Press this button the up&down swing function can be started and canceled. The remote controller defaults to static swing condition.
●
Press "MODE" button and " " button at the same time when remote controller OFF to switch between simple swing and static swing.
●
In static swing condition, pressing this button, the swing angle of up&down swing louver changes as
below:
fan1
fan
2
fan3
fan4
fan5
stepless speed
AU
TO
No display
