Skyworth FILTOUCH WI-FI, Инструкция по использованию и установке

Страница: 29 / 41

2
6
Operation Instruction
On/Off
Press the " " button to turn on or off the unit.
Mode Setting
In on-state, press the " " button to switch the operation
modes as the sequence shown in below:
Note:
You cannot set to a mode from the wired controller of the
indoor unit that conflicts with the master wired controller of
an indoor unit.
Temperature Setting
Press "▲" or "▼" button to increase or decrease setting
temperature in on-state of the unit. If press either of them
continuously, temperature will be changed rapidly.
Temperature setting range is 16°C~31°C (61°F-88°F).
Note:
In Auto mode, the setting temperature is un-adjustable.
Fan Speed Setting
Press " " button, fan speed of indoor unit will change as the sequence below:
Note:
● After in stallation completed, wired controller will detect the
unit type automatically. Different types may have different
ways of fan speed display, it can be divided into the 2 kinds
above.
● In dry mode, the fan speed is default to low fan speed and
can not be adjusted.
● When set the auto mode, the indoor fan speed will be changed according to the indoor
ambient temp., The fan speed strip is not displayed.
Auto Cooling Dry Fan Heating
6(7
6(7
6(7