The “Regulators” tab allows reading the voltages and currents for each on-board power supply. Each regulator may be switched on/off
or voltage changed as necessary. Similarly, the “GPIO” tab allows for monitoring and control of the programmable digital inputs of the
Si5332. Controlling regulators and GPIO functions within CBPro requires DIP switches on the EVB to be set to default positions (Off).
See
Section 3.1 Initial Default Configuration
for more information.
Figure 4.4. EVB GUI - Regulators and GPIO Monitoring/Control
UG398: Si5332-8A-EVB User's Guide (Using Si5332-AM2-QFN40-EVB) • Using CBPro™ with Si5332-8A-EVB
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
11
Rev. 0.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 21, 2022
11
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from