Skywalker X-8, Инструкция по сборке

Страница: 3 / 35

FLIGHT CHARACTERISTICS
When flying your Skywalker X8, please keep in mind these manufacturer guidelines. As everything,
there are exceptions to the rule but these are good points to start with.
Please note that you should, control the Skywalker X8 flight speed within 85 km/H.
If you need a high speed flight you should strengthen wings, otherwise the wings support structure
may fail. Try to keep the Skywalker X8 within 3200 grams. If your build exceeds the 3200 gram
limit, you should strengthen the wings.
If there are technical problems or suggestions, please email or consult your local dealer or distributor
that you purchased your model from.
If you have any questions about this document or anything I can help you with, please email
me@raygrauberger.com and I will respond as soon as possible.
AFTER BUILD
Skywalker suggests you use brand name quality propeller such as CAM or APC. The design of the Skywalker X8
makes it easy to break down and carry to a field, or store in a smaller space.
CENTER OF GRAVITY
The position of the center of gravity for the Skywalker X8 is 440 millimeters away from the nose, a 5 millimeter
correction either forward or backwards from this point may be needed. The design of the Skywalker X8 puts the
Center of Gravity point and the rear edge of the hand hold slots on the bottom of the model, so measuring is not
needed.
MY CONFIGURATION
Motor: Hacker A40-12S V2
ESC: HACKER X-70 SB PRO
BATTERY: ZIPPY Flightmax 8000 mAh 6S1P 30C
Turnigy nano-tech 8000 mAh 5S 25~50C Lipo Pack
ZIPPY Flightmax 8000 mAh 5S1P 30C
PROPELLER: Graupner CAM Folding Propeller 13 X 7
SPINNER: Aeronaut 2-Blade Black Spinner for Folding Propellers
BLADE STOPPER: Aeronaut Fiberglass Blade Stopper for 2-Blade Spinners
YOKE: Aeronaut Yoke for 2-Blade Spinners