Skywalker X-8, Инструкция по сборке

Страница: 2 / 35

Technical Data
This is the X-8 FPV wing from Skywalker Technology. The BIG FPV wing!
The X-8 has been specifically designed for FPV and UAV, customized for F-Tek stabilizer
systems.
An awesome looking and fantastic flying FPV / UAV platform, molded out of EPO so it's nearly
indestructible!
This model offers a huge amount of under canopy space, excellent glide performance, and fast
low power cruise speeds in the region of 80-90 kph.
The airframe was designed from the outset to take FPV and other video devices, the equipment
bays have been laid out to suit FPV / UAV applications, there is a camera mount in the nose
and there's a forward oblique mount to suit a Gopro. Transporting the airframe is easy, both
the wing panels and the vertical stabs are bolt on affairs.
Nice design points are the molded in wing reflex, removable vertical stabilizers, ventral
launching grips, nose camera bay, canopy retained via strong magnets , molded battery and
FPV trays and 2 through fuselage spars - plus a molded in spar in each wing panel.
It's an impressive airframe that spans 2120mm and has a rather imposing silhouette!
Specs:
Wingspan: 2120 millimeters
Dry Weight: 880 grams
Take Off Weight: 3200 grams
Motor: 400 – 800 watts dependent on payload
Suggested Motor: 2820 KV730 with 60 amp Esc
Prop: 12 x 6 – 13 x 8 – 13 x 7
Battery: 4s 3000 mA - 6S 5000 mAh
Esc: 40-70 amp
Maximum Weight: 3500 grams
Not Included But Required:
3 or more channel radio system
2 x standard size servos
Propeller and adapter
Brushless out runner
Brushless ESC
Lipo battery
FPV or UAV system