15
V-ring
Frame
After attaching the first four Springs (10) in step 4, start
from the first spring you attached in step 4. Count exactly 11
V-rings and 11 frame holes in a clockwise direction. Attach
another Spring to the V-ring and frame at this point. Count
21 V-rings and 21 frame holes in a clockwise direction and
attach another Spring. Count 21 V-rings and 21 frame holes
in a clockwise direction two additional times and attach another
two Springs. You will now have 8 evenly spaced Springs (10)
attaching the jump mat (12) to the trampoline frame (not shown).
Attach eight Springs (not shown) evenly between the
eight attached Springs in the same manner as before.
Attach sixteen Springs (not shown) evenly between the
sixteen attached Springs.
Continue to attach the remaining Springs between the
previously attached Springs, until all Springs are attached.
Safety Note: For the j ump mat (12) to have the even tension
necessary for safety in jumping, the Springs (10) must be
attached as described. As you attach Springs, carefully
count the V-rings and frame holes. If a V-ring or hole is
skipped, reattach the Springs in the proper position.
7
. Lay the Frame Pad (13) on the frame. Adjust the posi-
tion of the Frame Pad so that the slits of the pad are just
above the holes of the socket of frame, as shown.
Inset drawing
11
Caution: Do not use the trampoline without the Frame Pad
(13). The Frame Pad is designed to reduce the possibility of
injuries due to jumpers coming in contact with the tram-
poline frame. If you do not have a Frame Pad, contact
your dealer to obtain one. Properly install the Frame Pad
before using the trampoline.
12
6
7
Pad
10
Socket
Align opening of enclosure
as shown here, near the left
of the middle of the two
legs of trampoline.
The first spring
