14
15
ASSEMBLY
1.
Handle swedged x1
11
9
Insert the swedged handle (9) into the
left foam (12) as shown in part A. Next
insert the unswedged handle (10) into
the right foam (11) as shown in part B.
Note:
If the foam is already pre-
installed, continue to step 2.
Insert the right handle (10) with foam
into the left handle (9) with foam as
shown.
Handle unswedged x1
11
10
Hand foam (left) x1
11
12
Hand foam (right) x1
11
11
2.
A
B
1
2
A
B
M6X32mm bolt x4
11
3
M6 nut x12
11
5
M6 washer x24
11
6
ASSEMBLY
4.
M6x61 bolt x4
11
1
Insert a frame unswedged (13) into a frame
swedged (14) as shown. Secure with a
M6x32 bolt (3), M6 nut (5) and two M6
washers (6).
Repeat this step until all 4 frame legs are
assembled.
11
4
Spacer x6
5.
Locate another frame leg and place one
spacer (4) inbetween the two legs as
shown. Secure with two M6x61 bolts (1),
two M6 nuts (5) and four M6 washers (6).
Note:
Do not tighten the nuts yet.
9
12
11
10
9
10
3.
13
14
3
6
5
6
Locate two frame legs and place one
spacer (4) inbetween the legs as shown.
Secure with two M6x61 bolts (1), two M6
nuts (5) and four M6 washers (6).
Note:
Do not tighten the nuts yet.
4
1
1
5
5
6
6
6
6
1
1
6
6
6
6 5
5
4
Frame unswedged x4
11
13
Frame swedged x4
11
13
