ASSEMBLY
Attach four big springs
(11)
to the
middle of
a middle
frame tube
(7)
. Repeat
this step to attach four big springs on each of the remaining middle frame
tubes.
You should now have 16 big springs placed, and 16 regular springs placed
for a total of 32 springs.
14
STEP 14
11
Big Spring
(x16)
You may want to use gloves for this step!
Using the spring tool
(26)
, hook
the
smaller end
of a spring
(10)
into the
V-Ring that’s just left of a corner
D-ring.
Stretch the free end of the spring until it reaches the nearest frame
hole on the corner tube
(1)
.
Repeat this step to attach four springs on each
corner. You should now have 16 springs placed.
Note: Do not place springs
on the corner D-rings or in the spring holes closest to the corner yet.
STEP 13
Spring
(x16)
26
Spring Tool
(x1)
10
(26)
Enclosure door
(1)
(11)
(11)
