SKYTRONIC 351.124, Руководство пользователя

Страница: 21 / 90

User Manual
18
5.2.6.3 PTZ Setup
5.2.6.4 Mobile
Mobile Phone Access
The DVR is currently compatible with mobile phones running Windows Mobile and Symbian operating
systems on 3G networks.
Before you can access the DVR from a mobile phone you need to setup the Network Configuration on the
DVR. Go to section 5.2.3 Network Setup on page 14 of the product manual for instructions on how to do this. You
also need to go to the Main Menu then Devices then Mobile and enter your user name and password, and set the
Server Port to 18600. This port also needs to be forwarded to the IP address of the DVR along with the ports from
5.2.3 Network Setup.
Explanation: You can only see one channel at a time when viewing from a mobile phone. The speed
of the display depends on the speed of the internet connection.
When accessing from a mobile phone with Windows Mobile operating system, use the following
procedure:
1. Webcam installation
First you need to install the webcam program that is included on the CD that comes with the DVR by
copying the “QQeye.CAB” file to the mobile phone. You can do this by attaching the mobile phone to a computer
and copying the file from the CD to the memory card on the phone, or by copying the file from the computer to the
phone’s memory card through a memory card reader or through a Bluetooth connection.
2. Click the windows mobile folder (red box in Pic 1) and choose the file
QQeye” Select the file which will open the window in Pic 3. The file is generally faulted to save as Device, direct
to phone, (shown in Pic 3) but you can save it to Device or Storage Card.
Enter into [Main menu Device PTZ Setup] to select
the channel you want to control and set PTZ protocol
(Pelco-D or Pelco-P), Baud Rate (1200, 2400, 4800, 9600),
Stop bit (1, 2), Parity Check (None, Odd, Even Mark Space),
Address Code and Cruise status respectively. Please note
the above mentioned channel settings must match the
settings of the PTZ camera.
Click [Main menu Device Mobile] to enter into [Mobile]
menu.
User Name: indicate user name of DVR.
User password: indicate user password of DVR
Server port: Mobile monitoring port. Setting range is between
1024 and 65535. Please note that
Explanation: Please connect DVR to Internet before
setting DVR port number and the server port no is not equal to
network menus.
Picture 5-37
Pic 2
Pic 3
Pic 1
Picture 5-36