___________________________________________________________________________________________________________
Rev
.
7/10/15 Page 5 of 5
Skytech RCAF-LMF-1
6. Clear Codes: Memory in the receiver might be full if the learn button is pressed too many times. If this happens it will not allow any
more codes to be learned and no audible beep will be heard. To clear memory, place the receiver slide switch into the REMOTE
position. Press the learn button and release after 10 seconds. You should hear three (3) long audible beeps indicating all codes
have cleared. You can now “learn” the transmitter to the receiver as described in the General Information Section.
SPECIFICATIONS
BATTERIES:
Transmitter 12V - (A23)
Remote Receiver 6V - 4 ea. AA 1.5 Alkaline
FCC ID No.'s: transmitter - K9L1002TX; receiver - K9L300IRX
Operating Frequency: 303.8 MHZ
Canadian ISC ID No.'s: transmitter - 2439 102 728; receiver - 2439 102 728A
FOR TECHNICAL SERVICE, CALL:
U. S. INQUIRIES
CANADIAN INQUIRIES
(855) 498-8324 or (260) 459-1703
(877) 472-3923
For Sales:
(888) 672-8929
WEBSITE: skytechpg.com
MANUFACTURED EXCLUSIVELY FOR SKYTECH II, INC.
FCC REQUIREMENTS
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
www.FireplaceRemoteControls.com
1.888.977.6849
