Page 4
17 - REMOTE RECEIVER INFORMATION
L. MANUAL MODE
M. FAN MODE
N. LIGHTING MODE
This remote can be manually or thermostatically operated.
Press
MODE/SET
button for manual
ON
. The flame icon will appear on
the
LCD
screen. Press
MODE/SET
button again to put the control into
THERMO
mode. Pressing
MODE/SET
again will turn fireplace
OFF
.
This remote will operate the fan, allowing for (6) different speed levels.
Press the
MODE/SET
button. The FAN icon (*) will light up. Press the
FAN
icon
on the LCD screen,
then the
UP or DOWN ARROWS
to select
the desired fan speed level. Press the MODE/SET button to set or wait
15 seconds and the control will automatically accept the new setting, exit
function setting mode and
LCD
display will return to normal view.
This remote will operate the lights, allowing for (6) different light levels.
When
LIGHT
button is pressed, Press the
MODE/SET
button. The
LIGHT
icon will appear on the LCD screen. Press the
LIGHT
icon on the screen.
Press
UP
or
DOWN
buttons to select desired light level. Press the MODE/
Set button or wait 15 seconds and the control will automatically accept the
new setting, exit function setting mode and
LCD
display will return to normal
view.
Figure 17L
Figure 17N
Figure 17M
IMPORTANT NOTE
Delayed ON/OFF - The fan will not turn on until fireplace has been
burning for 5 minutes and will not turn off for 12 minutes after
fireplace has been turned off.
EXCEPTION: If fireplace is turned back on during 12 minute off-
delay time frame, the fan will remain on. This applies to MANUAL and
THERMO modes
.
IMPORTANT NOTE
The MODE/SET button operates in a series that will cycle from ON to
THERMO to OFF.
NOTE
The fireplace does not have to be burning to operate the lights.
