REV. 3/19/05
Page 13 of 14
QUICK SET-UP GUIDE
FOR SKYTECH 3301PF PROGRAMMABLE TRANSMITTER
This guide is a “short cut” method to SET – UP and OPERATE the SKYTECH programmable transmitter.
For detailed instructions for each feature and function, see OWNE$R”S MANUAL.
INITIAL SET-UP
SET FUNCTIONS USING BUTTONS ON FRONT OF
TRANSMITTER
1. Remove battery cover.
2. Insert 2AAA batteries.
3. Press SETTING button.
4. Replace battery cover.
All further programming
Is to be made on front of
transmitter.
OPERATION
– Press MODE button on TRANSMITTER to change operating functions.
1. ON indicates the system is on, either manually or
thermostatically.
2. OFF indicates the entire system is turned off.
3. THERMO indicates the system will automatically cycle ON/OFF,
depending on programmed SET temperature.
4. PROGRAM indicates the system is operating with
PROGRAMED settings.
OTHER OPERATIONS
– Press corresponding buttons on TRANSMITTER to activate functions.
1 TIME
OF
DAY – Press TIMER/TIME button for less than ONE second.
2. TIMER
OPERATION – Press and hold TIMER/TIME button for two seconds.
6.
SET COUNTDOWN TIMER by pressing UP or DOWN buttons.
7. FAN
OPERATION – Press FAN button.
NOTE: Press SET button to stop LCD Digits from flashing.
QUICK PROGRAMMABLE GUIDE
1. SCALE
(
0
F/
0
C) – Press UP or
DOWN button. Press SET button.
2. DAY
OF
WEEK – Press AHEAD or
BACK button. Press SET button.
3. HOUR
OF
DAY – Press UP or
DOWN button. Press SET button.
NOTE: AM or PM on LCD.
4. MIN.
OF
DAY – Press UP or DOWN
button. Press SET button.
NOTE: Each SETTING will flash,
separately, on LCD screen. After each
SETTING you
must push SET button.
You may not have to change factory
setting, but you must push SET
button.
Setting
Button
TIME
AM
WE
OVERRIDE HOLD
1
4
3
2
FLAME
1
SU
NITE
PROGRAM
ON
THERMO
OFF
1 2
3
4
UP
DOWN
MODE
TIMER
TIME
SET
PROG
AHEAD
BACK
FAN
UP
DOWN
MODE
TIMER
TIME
SET
PROG
AHEAD
BACK
FAN
