___________________________________________________________________________________________________________
REV 1/19/12 Page 8 of 8
Skytech 3301BE-1
•
Cause the RF signal to get lost and not communicate with the receiver.
•
Cause the working distance to be shorter than normal.
NOTE: A receiver located in an area, where the ambient temperature inside the case exceeds 160
0
F, will cause THERMO-
SAFETY feature to cut in, requiring you to reposition the receiver to stop the warning beeps, and to “reset” the receiver’s operation.
7. Due to handling and shipping of the unit, handling or dropping of the transmitter by the customer, and heat conditions to the
receiver, some units may need an occasional frequency adjustment. This adjustment is made to improve the communication and
operating distance between the transmitter and the receiver. See RECEIVER ADJUSTMENT.
RECEIVER ADJUSTMENT & RECOMMENDED ADJUSTMENT
A. To adjust at the receiver, use a small slotted screwdriver. Turn the adjustment screw
counter-clockwise about 5 degrees or a maximum of 1/8 turn. This should correct the
distance problem.
B. If that does not correct the problem, return adjustment screw to original position and
then turn adjustment screw clockwise.
This adjustment is like tuning your radio. If you keep turning the adjustment screw, in either
direction, you will go past the proper setting (tuning).
BATTERY LIFE
Life expectancy of alkaline batteries in the SKYTECH 3301 BE should be at least 12 months. Replace all batteries annually. When the
Transmitter no longer operates the receiver from a distance it did previously (i.e., the transmitter’s range has decreased) or the remote
receiver does not function at all, the batteries should be checked in the transmitter. The Transmitter should operate with as little as 2.5
volts of battery power, measuring at the (2) 1.5-volt batteries.
SPECIFICATIONS
BATTERIES: Transmitter 3V- 2 ea. AAA 1.5V, Alkaline
Remote Receiver (NO BATTERIES) FCC ID No.’s: transmitter –(K9L3301TX); receiver – (K9L3001RX)
Operating Frequency: 303.8MHZ Canadian IC ID No.’s: transmitter – 2439-3301TX; receiver – 2439-102-760A
FOR TECHNICAL
U.S. INQUIRIES
CANADIAN INQUIRIES
SERVICE, CALL:
888/672-8929 or
877-472-3923
260/459-1703
Website: skytechsystem.com
MANUFACTURED EXCLUSIVELY FOR SKYTECH II, INC
FCC REQUIREMENTS
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
Frequency
Adjustment
Hole
