Skytec STM-3018A, Инструкция по эксплуатации

Страница: 4 / 16

14. POWER
Power switch
15. MASTER
This controls the overall output from the mixer, master output to the PA system
16. PHONES LEVEL
This controls the output volume of the headphones. Care should be taken not to have this set to high as
it could result in damage to both the hearing of the user and the headphones. The channel to be monitored is selected via
the cue assign control Knob.
17. HEADPHONE
1/4' jack headphone out
18. CUE SELECTOR
Select each channel of the CUE signal
19. CHANNEL 4
Line4 input/mic2 JACKS
20. CHANNEL 3
MP3/Bluetooth/Line3 JACKS
21. CHANNEL 2
PHONO 2 INPUT/line2 JACKS
22. CHANNEL 1
PHONO 1 INPUT/line1 JACKS
23. MIC2 CHANNEL
Wireless microphone input JACKS
24. MIC1 CHANNEL
Microphone input JACK
Rear Panel
：
1. MIC JACK
Microphones with a 1/4” connector can be connected to these input terminals.
2. LINE INPUTS
Let you connect most high-level audio source, such as CD players, tape deck, tuner or VCR.
3. GROUND
Ground Screw for turntables.
4. INPUT SELECTOR
Set these switches based on what is plugged into PHONO/ Line input jacks.