3 - 12
•
Hearing damage: Loudspeakers are easily capable
of generating high sound pressure levels (SPL)
sufficient to cause permanent hearing damage to
performers, production crew and audience
members. Caution should be taken to avoid
prolonged exposure to SPL in excess of 90 dB.
•
Do not overload the box to avoid damage to the
speakers.
•
Do not place an open fire (candle, etc.) on top or
next to the box - FIRE HAZARD
•
Only connect to an earthed mains outlet of
230Vac/50Hz.
•
For indoor use only. If the box is used outdoors,
you need to make sure that no humidity can enter
the box.
•
When not in use, unplug the unit from the mains.
•
Unplug the unit from the mains prior to checking or
replacing the fuse.
•
Make sure that the box is placed on a stable,
strong surface.
•
The boxes can be stacked but do not put more than
60kg weight on the box.
•
The boxes can be hung. Use only strong and
approved mounting material. During the mounting,
make sure that nobody is standing below the
mounting area.
•
Place the stand always on a flat, level, and
•
Do not place liquids on the box and protect it
against humidity. Humidity can shorten the life
time considerably.
•
Only use suitable means of transportation if
you want to move the box
– BEWARE OF
YOUR BACK !!
•
If the unit is damaged to an extent that you can
see internal parts, do not plug the unit in a
mains outlet. In this case, please contact
Tronios.
•
Always unplug the unit during a thunderstorm
or when it is not in use.
•
If the unit has not been used for a longer period
of time, condensation can occur inside the
housing. Please let the unit reach room
temperature prior to use.
•
Never try to repair the unit yourself. It does not
contain any user serviceable parts.
•
Run the mains lead in such a way that nobody
can fall over it and nothing can be put on it.
•
Only use the supplied mains lead or another
lead recommended by SkyTec.
•
Set the unit to the lowest volume prior to
switching it on
•
Keep the unit out of the reach of children.
Protect your environment. Recycle packing
stable surface and that the legs do not present a
material whenever possible.
trip hazard.
Use only stands which are designed to support Do
not throw a faulty unit into normal the
weight of the speaker. Do not attempt to household
waste but bring it to a special
place more than one speaker on a stand collection
point. A large part of it can be designed for
a single speaker. recycled.
Route cables so that peoples will not trip over them
pulling the speaker over.
PRODUCT FEATURES
General
-
1x 12" Amplified speaker
-
1x 12" Passive speaker
-
Set of speaker stands 1.8m height
-
5m Speaker cable (jack-jack)
-
Tone control
-
Line and microphone input
-
Plug and Play unit
-
Supplied as a set in one carton
About the enclosure
The enclosure and baffle of this range of speakers are made of polypropylene co-polymer. The use of
copolymer allows features such as stand mounting sockets, handholds, ports and high frequency horns to be
molded directly into the cabinet. Not only do you get contemporary appearance, you also get lots of
functionality.
INPUT PANEL
