- 12 -
The JOG dial (19) allows you to adjust the sound effects with or without the ‘HOLD’ function switched on.
These settings will be erased when the CD drawer is opened or the mains supply is switched off.
'HOLD' function
The ‘HOLD’ function is switched on and off by pressing the SELECT button for more than 3 seconds. When
the ‘HOLD’ function is switched on, the setting of the effect remains as adjusted via the JOG dial (19) and
will only be changed if the JOG dial is rotated. If the ‘HOLD’ function is switched off, the setting returns
automatically to normal after a few seconds.
23. CUE CONTROL PANEL / SAM button
The operation of the MEMO and number buttons has already been described in the function of the CUE
button (17).
Operation of the SAM (sample) button
It is possible to store a portion of 8 seconds of music in the memory. This stored portion can be played any
time even during the play of another track on the CD or of a totally different CD. The storage in the memory
is done exactly as described in the section SEAMLESS LOOP (see point 16). Create a SEAMLESS LOOP of
less than 8 seconds via the A and B buttons as described above. Press the SAM button during the play of
the loop. It flashes blue to indicate that the memory is now loaded with the starting point of the loop such
as it has been set by the A button. Now you can play this portion of 8 seconds any time just by pressing
the SAM button. The memory is erased by pressing simultaneously the SAM and the TIME (2) buttons.
QUICK BASIC INSTRUCTIONS
Play
After having connected the CD player to a mixer/amplifier and the mains, switch on the POWER of the play
unit. Open the CD drawer via the OPEN/CLOSE (1) buttons or the blue button on the player. Insert a CD and
press again button (1) to close the drawer. The CD will be read by the player and the number of tracks and
the playing time will be displayed. After that, press the PLAY/PAUSE button (15) to start playing a CD. Press
the PLAY/PAUSE button to interrupt shortly the play and to search for another track on the CD via the
buttons (13). Press the PLAY/PAUSE button (15) to resume play.
Cue function
Press the CUE button (17) in Pause mode. This point will be stored in the memory and the CUE LED is
flashing. During play, press the CUE or BOP button and the player skips back to the marked point.
Search function
The setting of the exact starting point is done via the search function which is operated by the big JOG dial
(19). Switch into Pause mode and rotate the dial (19). The music on the CD is still audible and the
frames/seconds/minutes are displayed. You can search forwards and backwards.
AUTO SWITCH OFF
The dual CD players features a time function that switches the unit off when it has not been operated over 30
minutes.
A FEW RECOMMENDATIONS IF THE UNIT DOESN’T WORK PROPERLY
-Check all connections, cables and leads.
-Check the setting of the amplifier. Is it set to the correct input channel ??
-Is the mains outlet powered and the unit switched on?
-Is the CD inserted in the correct way?
