SKYSHL SS413F Series, Быстрое руководство

Страница: 13 / 24

6.Use a fiber cleaver to cut the fiber
(make sure the end face after the cut is
flat)
5.Remove the fiber sheath and coating
and use alcohol to clean the fiber
11.Place the heat shrinkable sleeve in
the middle of the heater
10.Take out optical fiber
3.Cleaning coating or tight sleeve of
optical fibers
8.Close the windproof cover and begin
to fuse the optical fibers
2.Confrimation of splice and heater
mode
9.LCD screen observation of optical
fiber welding
11
7.Place optical fibers in V-groove of the
SS413F
8.
Basic Fusion Procedures
(Youtube Video:https://youtu.be/A6uZtgps8Ok)
The end of the optical fiber is placed
between the V-groove edge and the center
of the electrode.
Electrode center
V groove edge
"Auto SM" fusion mode is
Recommended for SM(G.652&
G.657)." Standard 60mm ” heater
mode is recommended for the length
ofprotectivecasingis 60mm.
4.Putting Optical Fiber into thermal
shrinkage protection casing
1.Turn on the power of the SS413F
Because the fiber is very fragile, do not
touch other objects with the end face of
the cut fiber.