Power and Battery Connection
Specification
1. Connect to the power source
2. Connect the battery
AC 100-240V Mains Power Supply:
12V DC Battery / DC Power Supply:
There are two ways to power SkyRC T400Q: DC 11-18V and AC 100-240V.
To avoid short circuit, always connect the charge leads to
the charger first, and then to the battery.
Disconnect the pack in the reverse order.
1) LiPo Battery Connection
For safety reasons, the default setting for charging Lithium (LiPo, Lilon,
LiFe and LiHV) battery is using a balance adaptor to connect the battery and
charger in Charge, Fast Charge, Balance Charge, Discharge and Storage
modes.
But if the battery comes without balance wires, please proceed with the
prompt message "No balance cable detected, push Enter to continue."
The balance wires of the battery must connect to the charger with the black
wire aligned to the negative marking. Ensure correct polarity!
2) NiMH/NiCd or Pb Battery Connection
Please scan and watch the tutorial video about how to
charge LiPo battery in balance mode.
AC Input Voltage:
100-240V
DC Input Voltage:
11-18V
LiPo/LiHV/LiFe/LiIon:
1-6S
NiMH/NiCd:
1-15S
Pb:
2-20V
Charge Wattage:
100W X 4
Charge Current:
0.1-12.0A
Balance Current:
500mA/cell
Discharge Wattage:
10W
Discharge Current:
0.1-2.0A
Weight:
1610g
Case Size:
186*103*209mm
RoHS
© 2022.07 [Version 1.0]
7504-1666-01
Manufactured by
All specifications and figures are subject to change without notice.
SKYRC TECHNOLOGY CO., LTD.
