· 07
OSPERY FPV RACER
MOTOR UNLOCK / LOCK
Throttle stick on the right
Throttle/Rudder stick
ELEV stick
Throttle stick on the left
Throttle/Rudder stick
ELEV stick
After binding the remote controller with the OSPERY FPV racer, Gently push the throttle stick down and
move the rudder (YAW) stick to the right side and hold for more than 2 seconds to unlock the motors.
LED inside the body will turn GREEN.
Be very careful at this point, as pushing the throttle up will start the motors.
You can test by pushing the stick up a little, the motors should start.
Motor Unlock
Motor Unlock / Lock
Motor lock
Lock the motors by moving the throttle stick all the way down and the rudder (YAW) stick all the way to
the left. GREEN LED will turn off.
TEST:
Push the throttle stick up a little, the motors will not start when locked.
NOTICE:
The motors are LOCKED by default after successful binding.
The OSPERY FPV racer have a low-voltage alarm beeper.
And the OSD give you a visual reference for the remaining battery power.
When voltage reach below 10.2 volts the RIGHT LED light will flash and the beeper will
sound alarm.
WARNING: Do not hesitate to land when you hear the alarm or see the OSD
indicating 10.2 volts.