06 ·
OSPERY FPV RACER
READY FOR FLIGHT
Place the aircraft in a wide open space,
with the rear facing you.
(This position) is known as “TAIL IN”
Put all the function switches to the UP position, put all trims and dials to the MIDDLE
position, move the throttle to the lowest position. Press two power button simultaneously
to turn on the Remote Controller. To turn off Remote Controller, press two power button
simultaneously again.
READY FOR FLIGHT
Attention:
You will hear Beep~... sound. Put switch C to lower position for Dynamic Motor Tilting.
Dynamic Motor Tilting Mode
For the normal flight mode, put the switch C to middle position.
Put the aircraft on a horizontal place and connect the
aircraft power, then the rear LED light turn on.
(Make sure positive and negative connected correctly)
1.
2.
3.
4.
Front
Rear
Switch C