NiMH Sensitivity
D.Peak Default
NiMH Sensitivity
D.Peak Default
INC
INC
DEC
DEC
-
-
+
+
Start
Enter
Batt type
Stop
‘>3 seconds’
Start
Enter
NiMH Sensitivity
D.Peak Default
Charged
capacity
Number
of
cells
Charging
time
Charging
current
Battery
voltage
The left side of the first line shows the type of battery you choose.
The value on the left of the second line of the charger is current
u s e r s e t , A f t e r s e t t i n g t h e c u r r e n t a n d v o l t a g e , p r e s s
START/ENTER key for more than 3 seconds to start the
process.(charge current: 0.1-5.0A, voltage: 3.7-22.2V).
This displays the number of cells you set up and the processor
detects. “R” shows the number of cells detected by the charger
and “S” is the number of cells set by you at the previous screen. If
both numbers are identical you can start charging by press
START/ENTER button. If not, press BATT TYPE/STOP button to
go back to previous screen to carefully check the number of cells
of the battery pack before going ahead.
This screen shows the real-time status during charge process.
Press BATT TYPE/STOP key once to stop the charge process.
Charging of Lithium battery
Charging of lithium battery
This charging mode is for charging Li-Po/Ion/Fe battery without balance lead.
Charging lithium battery in the charge mode
16
