background image

OPERATION

The  most  important  tool  to  operate  the  charger  is  the  red  rotary  dial 
and black button. 

Enter/Start Rotary Dial

Mode/Stop Button

Enter/Start Rotary Dial 

The  dial  has  three  functions:  rotating  the  dial  in  both  directions  will 
scroll  through  menus  and  adjust  parameters  quickly  and  easily,  and 
pressing  down  on  the  dial  acts  as  button  which  is  often  used  to  enter 
parameter alert or store parameters on-screen.

Mode/Stop Button

It is used to stop the progress or go back to previous step/screen.

When you are willing to alter the parameter value in the program, press 
the  dial  to  make  it  blink  then  change  the  value  by  rotating  the  dial 
clockwise or counterclockwise. The value will be stored by re-pressing 
the dial. When you are willing to start the progress, press and hold the 
dial  for  3  seconds.  When  you  are  willing  to  stop  the  progress  or  go 
back to previous step/screen, press the button once.

When  you  power  on  the  charger,  it  will  enter  LiPo  Battery  balance 
program  directly.  You  could  change  the  mode  (balance  mode,  normal 
charge mode, fast charge mode, store mode or discharge mode), enter 
the desired charging/discharging mode, set the referred parameter and 
start the progress.
If  you  have  no  request  for  LiPo  Battery  program,  please  press  the 
button to enter Program Select screen.

14

15

6X80 Plus

6X80 Plus

LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM

These programs are only suitable for charging and discharging lithium 
batteries with a nominal voltage of 3.7V, 3.6V and 3.3V per cell. These 
batteries need to adopt different charge technique which is termed as 
constant  voltage(CV)  and  constant  current(CC)  method.  The  charge 
current varies according to the battery capacity and performance. The 
final  voltage  of  charge  process  is  also  very  important;  it  should  be 
precisely matched with the charge voltage of the battery. They are 4.2V 
for  LiPo,  3.6  V  for  LiFe,  and  4.1V  for  Lilon.  The  charge  current  and 
nominal  voltage  as  for  cell  count  set  on  the  charge  program  must 
always be correct for the battery to be charged.

CHARGING LITHIUM BATTERY AT BALANCE MODE

This  function  is  for  balancing  the  voltage  of  lithium-polymer  battery 
cells while charging.
In  the  balance  mode,  the  battery  needs  to  connect  to  the  battery's 
power lead with balance wire.
In  this  mode,  the  charging  process  will  be  different  from  ordinary 
charging  mode. The  internal  processor  of  the  charger  will  monitor  the 
voltages  of  each  cell  of  the  battery  pack  and  control  charging  current 
which is feeding to each cell to equalize the voltage.
Note: We recommend charging lithium batteries with a balance wire in 
the balance mode only.

-

-

+

+

Press
Dial

Mode
Stop

> 3 seconds

The  left  side  of  the  first  line  shows  the  type 
of battery you choose. The value on the left 
of  the  second  line  of  the  charger  is  current 
the  user  sets.  After  setting  the  current  and 
voltage,  press  and  hold  the  dial  for  3 
seconds to start the process.

SELECT

SELECT

Содержание 6x80Plus





















Отзывы: